Capacitive touch IC

HYCON Capacitive touch screen touch programme

  • HYCON touch IC supports for classicaland single layer sensor patterndesign.
  • HYCON touch IC supports from 1.5 -inch ~10.1 inch capacitive touch screen.
  • Supports various touch screen factory process schema containsG/G ,OGS,G/F/F,On-cell and other mechanical structures.
  • Supports a variety of new materials, such as Metal Mesh, Nano-Silver, such as carbon nanotubes and Graphene..etc.
  • Support for mainstream operating system Android, Linux, and Windows…etc.
  • Product application support for consumer and industrial category hand-held devices with touch-screen.

 

HYCON TP IC Has a unique multi touch technology solutions

  • Industrial applications
    • Support glove fingers touch, the thick cover multi-touch, the water smoke or water droplet touch..etc. , realize the extremely good touch performance in the industrial environment.
  • Unique noise suppressiontechnology
    • Unique built-in noise analysis techniques, and unique analysis tools, you can quickly and accurately analyze power supply,LCD,RFnoise frequency.
    • Unique built-in LCD noise suppression circuit, realize stable and smooth touch experience under full lamination process with LCD.
  • High signal-to-noise ratio and low power consumption
    • High signal to noise ratio, SNR up to100,more easily achieve high sensitivity requirements project
    • Multiple power modes automatically switch to enhance operational convenience at the same time extend the standby time on device.
  • Stable mass production suitability
    • Perfect automatic environmental compensation capability and broad circuit working rangeto ensure that products in process and materials under normal conditions of deviations to get consistent performance and performance.
  • To offer clients customized features
    • Professional, experienced development teams, giving customers more efficient development and application of more flexible space.

Chip selection 1

 

Model Name

Panel Package  

Touch Panel Size

 

Status

TX RX Type Pin Size(mm)
HY4613B-N048 21 12 QFN 48 6*6*0.75 <5.0″ M/P
HY4614B-N068 28 16 QFN 68 8*8*0.75 7.0″~10.1″ M/P
HY4621-NS32 13 9 QFN 32 4*4*0.55 <5.0″ M/P
HY4623-NS48 24 12 QFN 48 5*5*0.55 5.1″~7.0″ M/P

 

Product performance features:

    • Hycon unique sensing methodology is what allows us to deliver groundbreaking SNR performance without the need for high voltage drivers. It gives you all the design margin you need to make your touchscreen designs a snap.
    • Supports 10-finger simultaneous touch and supports IIC online firmware update.
    • The touch module can be applied to thick cover designs, and the maximum glass cover can be up to 4mm.
    • Support touch function debugging with gloves, and can support touch function of work gloves made of different materials.
    • The touch screen solution can be used in environments with water mist.
    • Unique anti-interference characteristics of LCD and power supply noise, giving the environment self-detection and compensation functions.
    • Provide an open application tool platform to allow customers to develop and analyze problems more efficiently.

     

    Chip selection 2

     

    Model Name

    Panel Package  

    Touch Panel Size

     

    Status

    TX RX Type Pin Size(mm)
    HY4633B-N048 21 12 QFN 48 6*6*0.75 <5.3″ M/P
    HY4635B-N068 28 16 QFN 68 8*8*0.75 7.0″~10.1″ M/P

     

    Product performance features:

      • Unique anti-LCD and power interference processing technology, built-in noise spectrum analysis capability, can automatically compensate for problems caused by the environment.
      • Hycon touch has unique sensing mechanisms that can detect water on the screen and ignore it. Hycon touch can also track your finger flawlessly, even when your screen is covered in water. This makes Hycon touch an ideal product for all marine applications, or for anyone who just wants to use their touchscreen when wet.
      • Hycon touch solution enables users to keep even the thickest ski gloves on while using their touchscreen. It can even sense your fingers while wearing thick gloves with water on the screen.
      • Due to the unique sensing performance of the chip, plastic 3D surfaces with fixed or varying thicknesses of 10 mm or more and even air gaps in the stack are acceptable designs.
      • Matches active pen solutions and also supports passive pen design solutions.

       

      Chip selection 3

       

      Model Name

      Panel Package  

      Touch Panel Size

       

      Status

      TX RX Type Pin Size(mm)
      HY4665U-N088 36 20 QFN10*10 88 10*10*0.75 10.1″-12″ M/P
      HY4658-L128 50 30 LQFP14*14 128 14*14*1.4 <15.6″ M/P

       

      Product performance features:

        • Hycon touch series user interface chips are specially designed to withstand the rigors of extreme environments. Using special simulations and clever designs, our engineers develop chips that can withstand heat, cold, moisture, noisy systems and any environmental impact a person may face. We’re ideal for ruggedized applications where there’s no test your touchscreen won’t fail.
        • Hycon touch capacitive touch screen is very suitable for many industrial, medical, home appliance and other applications because of its ruggedness and easy operation
        • Unique anti-LCD and power interference processing technology, built-in noise spectrum analysis capability, can automatically compensate for problems caused by the environment.
        • Has a unique sensing mechanism that can detect water on the screen and ignore it. Tracks your finger perfectly even if your screen is covered in water. This makes the Hycon touch an ideal product for all marine applications or for anyone who just wants to use a touch screen when wet.
        • Hycon touch solution allows even the thickest ski gloves to be worn when using the touch screen. It can still sense your fingers when there’s water on the screen and you’re wearing thick motorcycle gloves.
        • Due to the unique sensing performance of the chip, plastic 3D surfaces with fixed or varying thicknesses of 10 mm or more and even air gaps in the stack are acceptable designs.
        • Matches active pen solutions and also supports passive pen design solutions.

Application file download:

Product introduction:

Driver Sample Code:

  • Gloves and heavy waterproof performance demonstration

    Noise test function

    Waterproof function

    stylus function

    8mm cover glass+ Waterproof